GeyserWise Dual gives clear display of water temperature, time, day, heating mode and malfunction conditions on PV system and geyser.
Auto or manual heating.
Easy temperature setting to your requirements (30 – 65°C) factory default is 55°C for AC and 65°C for DC.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E1 to E7.
Electronic thermostat with mechanical thermal cut-out at 90°C.
LDR control to control AC vs DC mode of water heating.
Operating voltage 230VAC / 50HZ.
Main relay contact rating 20AMP (Max 3kW element).
Operating voltage range 160V – 250VAC.
Control circuit 5.5 – 12VDC.
Earth leakage protection at 25mA action time ≤ 0,1 second.
Recommended ambient temperatures: -20 to 55°C; Max 75°C.
Temperature range 0 – 200°C (“-5” when below -5°C).
DC on at set light value up to 75°C.
DC differential between 3 – 7°C (control DC element in on or off state).
230 VAC temperature setting ranges 30 – 65°C.
230 VAC heat failure – when increase at a rate of 4°C or less per hour.
Mechanical thermal cut-out 90°C (300 manual resets).
Thermal cut-out – Isolate live.
Dry heat detection – empty cylinder.
Temperature tolerance ± 5°C and manufacturing drift is less than 6°C.
Temperature differential setting 1°C.
230 VAC switching differential for the element 6°C.
LDR sensor for light detection.
LDR settable 150 – 200 value
Temperature probe failure detection for tank.
Temperature probe range for geyser is -30 to +130°C.
Light level 1 range 0 – 230.
Isolate both L + N when element in an off state.
Control box insulated – Class 1.
Operating life – 50 000 cycles.
Geyserwise Dual Manuals : Gesyerwise Dual Manual